GS(1) User Commands GS(1) NAME gs - Aladdin Ghostscript interpreter/previewer SYNOPSIS gs [ _o_p_t_i_o_n_s ] [ _f_i_l_e_s ] ... DESCRIPTION Ghostscript is an implementation of Adobe Systems' PostScript (tm) language, which is in turn similar to Forth. _G_s reads _f_i_l_e_s in sequence and executes them as Ghostscript programs. After doing this, it reads further input from the standard input stream (normally the keyboard). Each line is interpreted separately. To exit from the interpreter, enter the `quit' command. The interpreter also exits gracefully if it encounters end-of-file. Typing the interrupt charac- ter (e.g. Control-C) is also safe. The interpreter recognizes several switches described below, which may appear anywhere in the command line and apply to all files thereafter. You can get a help message by invoking Ghostscript with the -h or -? option. This message also lists the available dev- ices. Ghostscript may be built with multiple output devices. Ghostscript normally opens the first one and directs output to it. To use device xyz as the initial output device, include the switch -sDEVICE=xyz in the command line. Note that this switch must precede the first .ps file, and only its first invocation has any effect. For example, for printer output in a normal confi- guration that includes an Epson printer driver, you might use the shell command gs -sDEVICE=epson myfile.ps instead of just gs myfile.ps Alternatively, you can type (epson) selectdevice (myfile.ps) run All output then goes to the printer instead of the display until further notice. You can switch devices at any time by using the selectdevice procedure, e.g., (vga) selectdevice or (epson) selectdevice As yet a third alternative, you can define an environment variable GS_DEVICE as the desired default device name. The order of precedence for these alternatives, highest to lowest, is: selectdevice SunOS 5.5 Last change: 26 March 1997 1 GS(1) User Commands GS(1) (command line) GS_DEVICE (first device in build list) To select the density on a printer, use gs -sDEVICE= -rx For example, on a 9-pin Epson-compatible printer, you can get the lowest-density (fastest) mode with gs -sDEVICE=epson -r60x72 and the highest-density mode with gs -sDEVICE=epson -r240x72. If you select a printer as the output device, Ghostscript also allows you to control where the device sends its out- put. Normally, output goes directly to a scratch file on Unix systems. To send the output to a series of files foo1.xyz, foo2.xyz, ..., use the switch -sOutputFile=foo%d.xyz The %d is a printf format specification; you can use other formats like %02d. Each file will receive one page of out- put. Alternatively, to send the output to a single file foo.xyz, with all the pages concatenated, use the switch -sOutputFile=foo.xyz On Unix systems, you can send the output directly to a pipe. For example, to pipe the output to the command `lpr' (which, on many Unix systems, is the command that spools output for a printer), use the switch -sOutputFile=\|lpr You can also send output to stdout for piping with the switch -sOutputFile=- In this case you must also use the - q switch, to prevent Ghostscript from writing messages to stdout. To find out what devices are available, type devicenames == after starting up Ghostscript. Alternatively, you can use the - h or -? switch in the command line; the help message also lists the available devices. To select a different paper size, use the command line switch -sPAPERSIZE=a_known_paper_size e.g., -sPAPERSIZE=a4 or -sPAPERSIZE=legal As of this printing, the known paper sizes, defined in gs_statd.ps, are: PAPERSIZE X" Y" X cm Y cm SunOS 5.5 Last change: 26 March 1997 2 GS(1) User Commands GS(1) ____________________________________________________ 11x17 11" 17" 27.94 43.18 a0 33.0556" 46.7778" 83.9611 118.816 a10 1.02778" 1.45833" 2.61056 3.70417 a1 23.3889" 33.0556" 59.4078 83.9611 a2 16.5278" 23.3889" 41.9806 59.4078 a3 11.6944" 16.5278" 29.7039 41.9806 a4 8.26389" 11.6944" 20.9903 29.7039 a5 5.84722" 8.26389" 14.8519 20.9903 a6 4.125" 5.84722" 10.4775 14.8519 a7 2.91667" 4.125" 7.40833 10.4775 a8 2.05556" 2.91667" 5.22111 7.40833 a9 1.45833" 2.05556" 3.70417 5.22111 archA 9" 12" 22.86 30.48 archB 12" 18" 30.48 45.72 archC 18" 24" 45.72 60.96 archD 24" 36" 60.96 91.44 archE 36" 48" 91.44 121.92 b0 39.3889" 55.6667" 100.048 141.393 b1 27.8333" 39.3889" 70.6967 100.048 b2 19.6944" 27.8333" 50.0239 70.6967 b3 13.9167" 19.6944" 35.3483 50.0239 b4 9.84722" 13.9167" 25.0119 35.3483 b5 6.95833" 9.84722" 17.6742 25.0119 flsa 8.5" 13" 21.59 33.02 flse 8.5" 13" 21.59 33.02 halfletter 5.5" 8.5" 13.97 21.59 ledger 17" 11" 43.18 27.94 legal 8.5" 14" 21.59 35.56 letter 8.5" 11" 21.59 27.94 note 7.5" 10" 19.05 25.4 INITIALIZATION FILES When looking for the initialization files (gs_*.ps), the files related to fonts, or the file for the `run' operator, Ghostscript first tries opening the file with the name as given (i.e., using the current working directory if none is specified). If this fails, and the file name doesn't specify an explicit directory or drive (i.e., doesn't begin with `/' on Unix systems), Ghostscript will try directories in the following order: 1. The directory/ies specified by the -I switch(es) in the command line (see below), if any; 2. The directory/ies specified by the GS_LIB environment variable, if any; 3. The directory/ies specified by the GS_LIB_DEFAULT macro in the Ghostscript makefile (which has been set to "/usr/local/share/ghostscript/M.N:/usr/local/share/ghostscript/fonts" where M.N is the Ghostscript version number). SunOS 5.5 Last change: 26 March 1997 3 GS(1) User Commands GS(1) Each of these (GS_LIB_DEFAULT, GS_LIB, and -I parameter) may be either a single directory, or a list of directories separated by a `:'. X RESOURCES Ghostscript looks for the following resources under the pro- gram name `Ghostscript': borderWidth The border width in pixels (default = 1). borderColor The name of the border color (default = black). geometry The window size and placement, WxH+X+Y (default is NULL). xResolution The number of x pixels per inch (default is computed from WidthOfScreen and WidthMMOfScreen). yResolution The number of y pixels per inch (default is computed from HeightOfScreen and HeightMMOfScreen). useBackingPixmap Determines whether backing store is to be used for sav- ing display window (default = true). See the file `use.txt' for a more complete list of resources. To set these resources, put them in a file (such as ~/.Xresources) in the following form: Ghostscript*geometry: 612x792-0+0 Ghostscript*xResolution: 72 Ghostscript*yResolution: 72 Then load the defaults into the X server: % xrdb -merge ~/.Xresources OPTIONS -- _f_i_l_e_n_a_m_e _a_r_g_1 ... Takes the next argument as a file name as usual, but takes all remaining arguments (even if they have the syntactic form of switches) and defines the name ARGU- MENTS in userdict (not systemdict) as an array of those strings, _b_e_f_o_r_e running the file. When Ghostscript finishes executing the file, it exits back to the SunOS 5.5 Last change: 26 March 1997 4 GS(1) User Commands GS(1) shell. -D_n_a_m_e=_t_o_k_e_n -d_n_a_m_e=_t_o_k_e_n Define a name in systemdict with the given definition. The token must be exactly one token (as defined by the `token' operator) and must not contain any whitespace. -D_n_a_m_e -d_n_a_m_e Define a name in systemdict with value=null. -S_n_a_m_e=_s_t_r_i_n_g -s_n_a_m_e=_s_t_r_i_n_g Define a name in systemdict with a given string as value. This is different from -d. For example, - dname=35 is equivalent to the program fragment /name 35 def whereas -s name=35 is equivalent to /name (35) def -q Quiet startup - suppress normal startup messages, and also do the equivalent of -dQUIET. -g_n_u_m_b_e_r_1x_n_u_m_b_e_r_2 Equivalent to - dDEVICEWIDTH=_n_u_m_b_e_r_1 and - dDEVICEHEIGHT=_n_u_m_b_e_r_2. This is for the benefit of dev- ices (such as X11 windows) that require (or allow) width and height to be specified. -r_n_u_m_b_e_r -r_n_u_m_b_e_r_1x_n_u_m_b_e_r_2 Equivalent to - dDEVICEXRESOLUTION=_n_u_m_b_e_r_1 and - dDEVICEYRESOLUTION=_n_u_m_b_e_r_2. This is for the benefit of devices (such as printers) that support multiple X and Y resolutions. (If only one number is given, it is used for both X and Y resolutions.) -I_d_i_r_e_c_t_o_r_i_e_s Adds the designated list of directories at the head of the search path for library files. - This is not really a switch. It indicates to Ghostscript that the standard input is coming from a file or a pipe. Ghostscript reads from stdin until reaching end-of-file, executing it like any other file, and then continues processing the command line. At the end of the command line, Ghostscript exits rather than going into its interactive mode. Note that gs_init.ps makes systemdict read-only, so the values of names defined with -D/d/S/s cannot be changed SunOS 5.5 Last change: 26 March 1997 5 GS(1) User Commands GS(1) (although, of course, they can be superseded by definitions in userdict or other dictionaries.) SPECIAL NAMES -dDISKFONTS Causes individual character outlines to be loaded from the disk the first time they are encountered. (Nor- mally Ghostscript loads all the character outlines when it loads a font.) This may allow loading more fonts into RAM, at the expense of slower rendering. -dNOCACHE Disables character caching. Only useful for debugging. -dNOBIND Disables the `bind' operator. Only useful for debug- ging. -dNODISPLAY Suppresses the normal initialization of the output dev- ice. This may be useful when debugging. -dNOPAUSE Disables the prompt and pause at the end of each page. This may be desirable for applications where another program is `driving' Ghostscript. -dNOPLATFONTS Disables the use of fonts supplied by the underlying platform (e.g. X Windows). This may be needed if the platform fonts look undesirably different from the scalable fonts. -dSAFER Disables the deletefile and renamefile operators, and the ability to open files in any mode other than read- only. This may be desirable for spoolers or other sen- sitive environments. -dWRITESYSTEMDICT Leaves systemdict writable. This is necessary when running special utility programs such as font2c and pcharstr, which must bypass normal PostScript access protection. -sDEVICE=_d_e_v_i_c_e Selects an alternate initial output device, as described above. -sOutputFile=_f_i_l_e_n_a_m_e Selects an alternate output file (or pipe) for the ini- tial output device, as described above. SunOS 5.5 Last change: 26 March 1997 6 GS(1) User Commands GS(1) FILES /usr/local/share/ghostscript/M.N/* Startup-files, utilities, and basic font definitions. /usr/local/share/ghostscript/fonts/* Additional font definitions. /usr/local/share/ghostscript/M.N/examples/* Demo Ghostscript files. /usr/local/share/ghostscript/M.N/doc/* Assorted document files. ENVIRONMENT GS_OPTIONS String of options to be processed before the command line options. GS_DEVICE Used to define the device used. GS_FONTPATH Path names used to search for fonts GS_LIB Path names for initialization files and fonts TEMP Where temporary files are made SEE ALSO The various Ghostscript document files (above). BUGS See the network news group `comp.lang.postscript'. SunOS 5.5 Last change: 26 March 1997 7